Your sim racing seat is one of the most important parts of your setup, so you want to make sure that it is always in working order. This can be easy to do, but it is also easy to neglect it over time. Knowing how to properly clean your sim racing seat is essential.
The 5 easy steps to clean your sim racing seat are:
- Check what material the seat is made from
- Vacuum up any dirt, dust and crumbs
- Clean the chair with the right solution
- Focus on the tough-to-remove stains
- Check all the fittings/screws are in place and tightened
Below, we have outlined a general approach that you can take to clean your sim racing chair. If you follow these steps you will have your chair back in working order in no time, and you will know how to take proper care of it to extend its life.
The Right Way To Clean Your Sim Racing Seat
Although it may sound like a fairly trivial task, there is a right way to clean your sim racing seat and a wrong way. Doing it the wrong way can damage your seat permanently, and aside from internal damage you can also ruin its aesthetic. There are a few things you need to take note of before you attempt to clean any sim racing seat.
A Variety Of Types
They come in many different shapes and sizes. This means there are lots of different approaches to take, and this covers things like the literal shape and size of the chair to the material from which it is made. Taking note of these specific things before you get started will prevent you from using the wrong cleaning solutions and potentially ruining your gaming chair.
If you follow the steps that we outline below, you will never go wrong when it comes to cleaning your sim racing seat. At the end, we also provide some general maintenance advice, so that you can make sure that your racing chair is always in working order. Each step is fairly easy to remember, and following each one will save you time and money in the long run.
The 5 Easy Steps To Cleaning Your Sim Racing Seat
1. Check What Material The Seat Is Made From
Sim racing chairs come in a variety of different materials. The main ones are PU leather, Alcantara, PVC (vinyl) and standard fabric. Each one of these materials will require a specific cleaner to be used, and so it is essential that you pick the right one to make sure that you don’t cause any unnecessary damage to the chair during cleaning.
Pick Your Equipment Wisely
However, it is not just the solution used to clean it that will be material-dependent, but also the way that you clean it. The type of brush or cloth that you use will also depend on the material from which the sim racing seat is made, as a rough cloth might damage a leather seat, while a soft sponge might not be enough to properly clean a PVC chair.
2. Vacuum Up Any Dirt, Dust And Crumbs
Once you know what material the chair is made from, you can make a start with the cleaning. Getting rid of the loose stuff is the next step, and all it takes is a quick vacuum of the outside of the chair to remove any dirt and dust that may have accumulated on the chair over time. This is a very quick step, but it is essential.
A Key Step
Aside from making the chair cleaner and perhaps more comfortable, doing this also prevents you from rubbing in any dirt into the chair in the next steps, making the situation worse. Vacuuming up any dust will also make sure that you are not being subjected to potential allergens while you are racing, which can only be a good thing. Although an easy step, vacuuming loose dirt is essential.
3. Clean The Chair With The Right Solution
The next step is to clean the chair with the correct solution, which will usually be water-based. This is where it is important to note what type of material has been used to make the chair. Using the wrong solution can do some serious permanent damage to your chair, and so it is vital that you choose the right one. Check the manufacturers instructions to make sure that you use the right solution.
Simple But Effective
Usually, warm water will do the trick, and perhaps even adding a small amount of dish soap will help to get more stubborn stains out. However, when it comes to tougher stains, you may need to use a solvent such as isopropyl alcohol in order to get them out. Again, different materials will withstand different cleaning agents, and if in doubt check the manufacturer’s instructions.
4. Focus On The Tough-To-Remove Stains
Getting the dirt and the dust off the seat was the easy part, and now you can focus on the general cleaning of the chair itself. Once you have gotten the easier stains out however, you will need to focus on the harder ones. Depending on how long it has been since you last cleaned your chair, some of the stains might be very difficult to get out.
Consider A Stronger Solvent
Scrubbing with soap and water will usually get them out with enough effort, however some stains will indeed require a stronger solvent such as rubbing alcohol. Use this to really get into the tougher stains, but be careful not to use too much or rub too hard. Doing so might end up doing more damage to the chair and you will no longer just have the stains to worry about.
5. Check All The Fittings/Screws Are In Place And Tightened
The final check is to make sure that all of the fittings and screws are in place. Tightening the screws will ensure the chair functions properly but is also safe to sit on. If you have moved anything while cleaning your sim racing chair, double-check that you put it back where it was, and that it is secure before you use the chair.
Get The Most Out Of Your Sim Racing Chair
Not only will checking all of the fittings and screws make sure that it is safe for you to sit on, it will also go a long way towards extending the life of your sim racing chair. Keeping everything secure will prevent parts of the chair rubbing against one another, causing unnecessary wear and tear.
Maintaining Your Sim Racing Seat
Being able to clean your sim racing chair properly is very useful but being able to keep it clean on a regular basis is also important. If you can keep it free from stains and vacuum it regularly to remove dust, you should rarely find yourself having to do a deep clean as described above.
Some Simple Tips
There are a few basic things that you can do to make sure you don’t have to perform regular deep cleans of your sim racing chair, while also preserving its quality over time. Do your best to keep it dry and free from dirt and dust. This will prevent it from getting stained, and it will also ensure that you are minimizing the amount of potential dust allergens in your room.
Store It Away If You Can
A great way to prevent your sim racing chair from getting dirty is to store it away when you are not using it. If you can’t do this, it might be worth your while to pick up a seat cover to put over it when you are not using it, to prevent accidents from happening when you are not racing.
Keeping it clean is one thing, but you should also check the screws and fittings on a regular basis to make sure it is always in working order. Doing this will prevent any unnecessary damage due to any loose nuts or screws. It is a simple check that only takes a few seconds, but it will help to preserve your sim racing chair for years to come.
Following the steps above and carrying out regular quality checks of your own on your sim racing chair will make sure that you can get the most out of it. Sim racing chairs can be expensive, so you should learn how to properly take care of yours.