When your kart is not in use it’s important to keep it protected from moisture and dust. The best way to keep it safe is by using a good quality kart cover. It can be difficult to find the right one, so it helps to do some research to find out which are the best go-kart covers.
The 4 best go-kart covers are:
- Demon Tweeks Kart Cover
- Sparco Kart Cover
- OMP K Style Kart Cover
- K1 Race Gear Kart Cover
If you don’t know what to look for in a go-kart cover, you’ve come to the right place! Below, we go through all the important details that are too often overlooked by kart owners looking to buy a new cover for their karts. But first, let’s discuss why you need a kart cover in the first place.
Do You Need A Go-Kart Cover?
Go-karts, as small as they may be, are expensive pieces of equipment. This means that it’s really important for you to take good care of them to ensure that they last as long as possible and that you can get good use out of them.
Sometimes the most damage is done to your kart when you’re not using it. This is especially the case if you’re not storing your go-kart properly. Moisture can cause rust on your chassis and other metallic parts, and dust can gather on your kart and turn into a ton of gunk and grime that takes a lot of time to clean off.
Getting The Most Out Of Your Kart
Overall, these two factors alone can begin to take away from your kart’s lifespan, and your chassis and engine might not survive as long as you want them to. It could also begin to affect your kart’s performance levels. Both of these factors will influence the value of your kart when or if you decide to sell it as well.
Using a go-kart cover will help you protect your go-kart when you’re not using it, even if it’s not stored away properly. Over the long term this will protect your kart’s lifespan and performance, which in turn will also protect the resale value of your kart.
There are some other elements that can also cause damage to your kart, and a go-kart cover will help you to keep your kart safe from these elements. These damaging elements are much the same as they are for your average road cars
The first factor that can cause severe damage to your kart is sunlight. If your kart sits out in the sun a lot, it could get damaged over time. The bumpers are all made from plastic, which can become brittle and begin to crack and break if left in the sun for extended periods of time. Excessive sunlight will also begin to damage your go-kart’s chassis and engine.
One of the most damaging elements for go-karts is salt. This is usually only a problem in coastal areas,near large bodies of saltwater. Salt in the moisture in the air can be abrasive on your kart, and it can corrode metal parts quite quickly if your kart is exposed to salty air near the sea for extended periods of time.
Finally, humidity can speed up the rust process, and you may see rust building up on your chassis and other metallic parts such as your steering rod and brakes. If this happens, you’ll end up spending more money having these parts replaced than you would have spent on a kart cover!
How To Choose The Right Go-Kart Cover
There are a few important factors to consider when you’re shopping for a go-kart cover. All of these factors combined will determine whether the kart cover is worth buying or not. However, as always, you should make your decision depending on which elements and features are the most important to you.
As with anything karting related, kart covers can be expensive. This is especially true if you’re buying from a reputable brand that has a big name in the karting industry – which you should be doing to ensure you get a quality kart cover! These brands are well known, so people know they’ll be buying quality products, and therefore are willing to pay more for them.
However, while a go-kart cover is important to the lifespan and performance of your kart, you don’t want to break the bank in order to get one. After all, budget is one of the most important elements in karting, and it will ultimately determine whether you race or not.
The first step is to determine whether a kart cover fits into your budget or not, and also whether it is absolutely necessary to get one. If you have a proper storage unit for your kart, it may not be such a priority to get a kart cover immediately, and you could focus on getting one at a later stage, allowing you to invest in other parts that are perhaps more important for your kart specifically.
When buying a kart cover, one of the more important elements to consider is the quality of the cover. This mainly comes down to the material that is used to make the kart cover and how well it keeps your kart protected from the elements.
It’s difficult to determine whether a kart cover is of high quality when you’re buying online. However, the majority of kart covers will tell you which type of material is used to make them, and this can give you an idea of what the quality might be like.
The majority of kart covers will be made of nylon, which is the best material for a go-kart cover. Nylon is lightweight and it doesn’t absorb (much) moisture, making it highly water-resistant. This also makes the cover easier to wash.
The design of the cover might not sound important, but to many karting drivers having a complete and consistent look is important. Therefore, this is an important element that you may need to consider.
Some kart covers come branded with different chassis colors and logos such as CRG or Tony Kart. These not be as desirable for you, however it’s still important to consider the price and the quality of the covers above all else.
Some covers might not come with nay branding but do come in different colors. Oftentimes you may also find covers that have no alternative color choices and you have to stick with what you get. Either way, it could influence your decision on a particular kart cover over another one, so how it looks is worth considering.
It’s always difficult to see whether your kart will fit underneath the specific kart cover you’re looking at. If you’re buying the cover online, it can be even more difficult to determine whether your particular kart might be a good fit for a specific cover.
It’s always recommended to look for versatile kart covers. This means a kart cover that can fit the majority of different karting classes, whether it’s cadet or senior class. If you’ve got a smaller kart, it’s still recommended to get a larger cover so that it will still fit your kart when you upgrade to a bigger one.
If the website doesn’t specify which karting class the cover has been designed for, it’s always a good idea to get in touch with customer service to make sure it is the right size before you buy the cover. However, in most cases the website will state which karts a given cover will fit.
Finally, the fit of the cover is really important. It’s great having a go-kart cover that fits over your kart, but if it doesn’t tighten at the bottom underneath your kart’s bumpers then it might not be doing as great of a job as it could be.
An important feature to look out for is an elastic lining that will enclose your kart entirely. The more parts of your kart that are covered the better, as it will prevent dust or moisture from making its way in underneath the cover while the kart is stored away.
You could still use a cover that does not have an elastic lining, as long as you find a solution to tighten the cover underneath the kart. In most cases though, it’s much easier to just buy a cover that has the elastic lining included. But now that you know what to look for when buying a go-kart cover, it’s time to check out the best ones on the market.
The 4 Best Go-Kart Covers
1. Demon Tweeks Kart Cover
The best go-kart cover is the Demon Tweeks kart cover. It’s one of the cheapest kart covers available, which is a huge plus for those on a budget. This kart cover can often be found for half the price of the majority of other covers on the market.
However, the fact that it is so much cheaper does not mean that it is at all worse than any other kart covers. It has a “heavy duty” quality, and it is waterproof and can be used on any kart. It also has an elastic skirt which ensures that the cover fits tightly around your kart. The Demon Tweeks kart cover is only available in black, which might not be ideal for some drivers.
However, another element that stands out is the “steering hood” which ensures the cover fits well over the kart and you don’t have to struggle and pull the cover excessively to get it on. The cover also comes with a convenient storage bag you can use to neatly tuck it away when it’s not in use.
2. Sparco Kart Cover
The Sparco go-kart cover comes in close second to the Demon Tweeks option. This cover is unique in that it is made from an aluminized material. This material has a reflective element that keeps the kart protected from direct sunlight. If your kart stays outside and gets a lot of sun, this might be the perfect cover for you.
The Sparco cover is also water resistant and has the elastic skirting you need for the tight fit around the bottom of the kart to ensure that no water or dust makes its way underneath the cover. Just like with the Demon Tweeks cover, you get a storage bag included, and it fits all classes and sizes of karts.
The Sparco kart cover is only available in two color combinations, with those being a silver and blue combo or a silver and red combo. The limited color selection may put some kart owners off, but this kart cover is an excellent choice, nevertheless.
3. OMP K Style Kart Cover
The OMP K Style kart cover is another decent choice. It’s waterproof, fits most karts, and it has an elasticated base. However, the OMP K Style kart cover doesn’t offer much more in terms of features. There’s no storage bag included, which can make it awkward to have laying around when you’re not using it on your kart.
There are no other special features to mention here, which is a bit disappointing considering the relatively high price point. In addition to that, the cover only comes with one style and color scheme. This cover will still do the job it needs to do though, so if you like the design, it could be the one to choose!
4. K1 Race Gear Kart Cover
The K1 Race Gear kart cover is another great choice, although it must be said that it is slightly more expensive than the other covers on this list.
The K1 kart cover is made of double layered nylon which gives it excellent durability. It is also waterproof, but it does lack the elasticated base that allows the cover to tightly fit around your kart. The cover does fit all types of karts though, and you can easily get it over your kart no matter which class you race in.
The main element that makes this cover unique is that it has the widest range of designs of the covers on this list, with a choice of red, blue or black. You’ll also be able to find specific branded cover options for CRG Karts, Tony Kart, and Birel kart chassis too.
How To Use A Go-Kart Cover
The best time to use your go-kart cover is when you’re storing the kart away. Having your cover securely fitted over the kart will help to keep it clean and this in turn will increase your kart’s lifespan and ensure it’s always performing at its best.
It can be tricky to get a kart cover on if it’s your first time trying it, but there’s an easy way to do it. The first step is to get your kart on a trolley, or at least on an object that will lift the kart in the air and allow you to get underneath it.
You first want to find the front of the cover, and this is usually where the branding or colors will be. Starting at the front of the kart, hook the cover underneath the nose of the kart and then secure the sides over the tires. Work your way to the back of the kart and hook the kart cover over the rear bumper.
If you have a cover with an elasticated base this process is much easier. Once the front and the rear have been hooked in, make sure to check the sides and pull the cover over the side pods and the tires. When your done, quickly go around the kart again to ensure that it is covered entirely. You should not be able to see any part of your kart.
How To Clean A Go-Kart Cover
Your go-kart cover is used to protect your kart from dirt and moisture. Over time, the cover itself can also begin to build up a lot of dirt, especially on the inside where you might find some dust, mud or even oil and lubricants from your kart.
It’s important to keep your kart cover as clean as possible, especially on the inside. It’s recommended to clean your kart cover at least once a week, depending on how often you drive your kart. The more you drive your kart, the quicker the cover will become dirty, and the more often you’ll have to clean it.
Cleaning It Often Is Best
Cleaning the cover is usually as simple as spraying it down with a hose or a pressure washer. However, this is only going to be enough if you clean it often. Sometimes you’ll need some cleaning solutions and a scrubbing brush to get all of the dirt off the kart cover.
Always remember to rinse any cleaning chemicals off the kart cover after you’ve cleaned it, and then leave the cover to dry. The best way to let your cover dry is by hanging it up and allowing it to air dry as much as possible before you use it again.
If there’s moisture left inside the kart cover when you put it back on, it will become trapped and could cause damage to your kart, so make sure that it is completely dry before using it again!
Go-kart covers are not just about keeping your kart clean, as they also help to prolong the lifespan of your kart and keep its performance levels at a high standard. Choosing the right kart cover might be difficult, but if you know what to look out for it becomes a much more manageable task.