The 5 Best Sim Racing Load Cell Pedals

If you are looking to upgrade your sim racing pedals, you may be considering making the leap to load cell models. But even if you already have experience with these types of pedal sets, it can be useful to know what the best load cell pedals are to make an informed decision.

The 5 best sim racing load cell pedals are:

  1. Simworx Pro GT V3
  2. Fanatec ClubSport V3 Inverted
  3. Fanatec CSL Elite LC
  4. Thrustmaster T-LCM
  5. ProtoSimTech PT2

Each of these options has its own pros and cons of course, which we will go into more detail about below. We have discussed what load cell pedals are in another article, but before we go into the list lets briefly discuss what you want to look for in a set of load cell pedals.

What To Look For In a Good Set Of Pedals

Load Cell vs Potentiometer

If you are looking to buy a new set of pedals for your sim racing rig, you may be considering going for a set of load cell pedals. This is in contrast to some of the cheaper options out there, that usually work using a potentiometer. Load cell pedals provide far more accurate feedback and resolution than their potentiometer counterparts, but they are a bit more expensive.

However, price as always should not be the deciding factor when you are considering buying some new pedals, but it will vary quite a lot due to some of the other factors that you do want to consider. The first of these is the size and weight of the pedals, as you will obviously need them to fit into your rig. However, most are a fairly standard size, and weight is only important for transportation.

Quality Construction

If you have a permanent rig setup then size and weight is less important, but what you should consider is the actual construction of the pedals. This will determine the way they look, how they feel, and how long they last. Ideally your pedals will last as long as you need them to, but for more experienced racers that spend a lot of time playing, the higher quality materials are essential.

Braking Force

The next important thing that you will want to consider when buying new pedals is the braking force. The brake pedal is the most important one to consider, just down to the way that it works and behaves physically. You do want sensitivity in your gas pedal, and obviously the clutch has to be functional too, but the brake pedal is the one that needs to offer the most control.

This is because as you get better at sim racing and start to become more skillful, you will realize how important braking zones are and how significant small amounts of braking can be over the course of a race. Thus, you want a brake pedal that not only offers a wide range of forces, usually measured in kg or lbs, but also one that has adjustable sensitivity.

Adjustability & Customization

The overall adjustability of the pedals will also be important, as you want to be able to set them up in the optimal configuration for your own driving style. Everything from the pedal positions to the way they respond can often be tuned using software or even physically on the pedals themselves, and the more customization you can have the better.

Other small things you might want to consider is the pedal arrangement, such as if they are inverted or not. You obviously might also want to consider how many pedals you need, as there are lots of single and double pedal options on the market, and you don’t need to simply go for the full 3-pedal setup. However, the three pedal setup is by far the most versatile.

By considering all of these different factors you will be able to make an informed purchasing decision when it comes to buying your next set of pedals. Next, let’s look at some of the best options if you are looking for new load cell pedals in particular.

The 5 Best Sim Racing Load Cell Pedals

1. Simworx Pro GT V3

Braking Force: 140kg/300lbs | Platform Compatibility: PC | Adjustable: Yes

In first place on our list of the best load cell pedals we have the Pro GT V3 pedals from Simworx. These pedals are quite pricey, but we believe that the realism they offer, paired with their high level of adjustability, makes them the ultimate set of load cell pedals for the intermediate racer through to the advanced racer too.

A Lot Of Braking Force

The maximum braking force on these pedals is massive, at more than 300lbs. This is more than the average sim racer needs, but it offers plenty for the most advanced racers to get the most out of them. The pedals themselves were designed in part with the help of some real race car drivers, and this ensures that they are as close to the real thing as possible.

Top-Quality Construction

The build quality of these pedals is excellent, as a CNC machine has been used for the ultimate precision. This means that not only do the pedals look great, but they also feel great and offer extensive longevity as well. The all-metal construction means that the pedals look like they have come straight out of a race car, and they behave like that too.

In terms of adjustability, the Simworx load cell pedals offer plenty. There are adjustable dampers that you can play around with, making it very easy to find the exact feel that you are looking for. Not only are the mechanics of the pedals fully adjustable, but their positions are as well. All three pedals can be moved around in six different ways.

The All-Round Best Choice

This allows for tuning to your specific desires, and so you can set them up for maximum comfort. This set of sim racing pedals is easy to set up, and they look and perform great too. Although a bit more expensive than some other options, we believe they are the best option if you want to get the very best load cell pedals on the market.

PROS:

  • Excellent construction
  • Top-quality performance
  • Fully adjustable

CONS:

  • Quite expensive

2. Fanatec ClubSport V3 Inverted

* Check Price Here *

Braking Force: 90kg/200lbs | Platform Compatibility: PC; Consoles when connected to a Fanatec racing wheel or wheelbase | Adjustable: Yes

The Inverted Option

Next up on our list are Fanatec’s ClubSport V3 pedals, but in their inverted form. You can get the standard configuration, which is a fair bit cheaper, but we believe the inverted setup just makes the pedals more realistic, and that they look better and feel more intuitive as well. That is why we are going with these over the standard setup.

* Check Price Here *

These pedals are substantially cheaper than higher-end hydraulic pedals, but they are also still just outside of the realm of cheap pedal setups. They are quite accessible for all experience levels, but the price is really what will determine who should go for these pedals. This is rarely a deciding factor in our articles, but they are priced fairly high for beginners.

High Price But Worth It

These pedals come in at quite a high price point, but that is due to the quality of their construction and their convenient design. Although they lack load cells on the gas and clutch pedals, they are still very well engineered. The inversion factor also plays a key role in the price, as this is a very natural configuration that most will find better than the standard version of these pedals.

Excellent Set Of Pedals

We think that the brilliant inverted design, along with the immersive experience that they offer, justifies the ClubSport V3’s position on our list. They do allow for some excellent braking forces up to 90kg/200lbs, and so you can get some very realistic feel out of these pedals. They also offer 12-bit resolution, which essentially means they offer a lot of detail in their performance.

The pedals are all adjustable as well, so you can change things like their positions and spacing. They are also designed to be easy to adjust, with no tools required. This makes these wheels even more accessible, and their platform compatibility helps this further. If you own a Fanatec wheel or wheelbase, you will be able to use these pedals with consoles.

Vibration Gas Pedal

However, going back to the technology within them, the gas pedal does feature a very interesting vibration motor. This allows for some very realistic simulation of wheelspin and wheel lock such as when the ABS kicks in. The gas pedal itself can also be adjusted via the two springs that are provided, and there are damper kits included for even more customization too.

The overall build quality of these pedals is excellent, as a CNC machine has been used for extra precision. They are made out of aluminum and have a very long-lasting construction. These pedals are verging on the more advanced sim racer side of things but are definitely targeted towards beginner or intermediate racers that don’t mind spending some cash and want the inverted style.

PROS:

  • Decent amount of braking force
  • Fully adjustable
  • Inverted for extra realism

CONS:

  • Quite expensive
  • Clutch and gas pedals are not load cell operated

3. Fanatec CSL Elite LC

* Check Price Here *

Braking Force: 90kg/200lbs | Platform Compatibility: PC; Consoles when connected to a Fanatec racing wheel or wheelbase | Adjustable: Yes

A Good Intermediate Option

Up next we have the Fanatec CSL Elite pedals. These come in at a much cheaper price point than the ClubSport V3s that we have already discussed. At their price point you can’t expect quite the same level of technology as the V3s, but you will still be able to benefit from some very high-quality load cell technology.

* Check Price Here *

Console Compatible

These pedals are also highly compatible, even being able to be used on consoles if you have a Fanatec wheelbase. This makes them a bit more accessible, and they are definitely targeted more towards beginner and intermediate sim racers. They really bring a high level of immersion to console sim racers, which is always a good thing.

The brake pedal offers a maximum force of 90kg/200lbs, which is a very large amount for pedals at this price point. The pedals are also all fully adjustable, and so you can have even more control over your playing experience. The 12-bit resolution on the clutch and gas pedals, as well as the 16-bit resolution on the brake pedal, makes these some very accurate pedals indeed.

Strong & Sturdy Construction

The pedals are made out of a full metal design, so they definitely do not feel cheap. Aside from the adjustable pedal positions, you can even change the covers on each one from bare to rubber, for yet more control over the way that they feel. Adjustment of the brake stiffness is also possible, which is ideal for the finer tuning of the most important pedal.

Overall, the CSL Elite pedals are some of the best on the market at any price point due to the quality of their build. However, the amount of braking force that they allow for, combined with the adjustability of each pedal, means that these are the ideal set for the intermediate sim racer that is looking to upgrade their pedals.

PROS:

  • A bit cheaper
  • Still very accurate with lots of force
  • A lot of adjustability

CONS:

  • Only load cell pedal is the brake

4. Thrustmaster T-LCM

Braking Force: 100kg/220lbs | Platform Compatibility: PC, PS4 and Xbox One | Adjustable: Yes

A Budget Option

Next on our list we have the Thrustmaster T-LCM pedals. These are definitely beginner or entry level load cell pedals, but nonetheless they still provide a very immersive experience and you really will not get much better value for money. The brake pedal is a load cell, but at this price point it is understandable that the clutch and gas pedals use different sensors instead.

Although these pedals are more of an entry level option, they provide one of the highest braking forces on our list at more than 200lbs of force. This is more than enough for most beginners, but with the adjustability of these pedals you can work up to that maximum over time, which also makes these the ideal choice for intermediate sim racers too.

Customization

Going further with the customization of these pedals you will be able to use the six springs that are provided to adjust the pedals to your liking. You can also adjust their positions, which is ideal for every playstyle and rig setup. Aside from the physical adjustments you can make, you will also be able to alter the dead zones of each pedal using some intuitive software too.

In terms of the detail and the realism of these pedals, considering their price point you do get quite a lot. The brake pedal offers 16-bits of resolution, which means there is a lot of data between your foot and the game you are playing. This means you can get some very immersive experiences, and with the adjustability you can really maximize it for your own playstyle.

A Great Choice For Beginners

The T-LCM pedals from Thrustmaster offer a very unique sim racing experience at a very affordable price point. This makes them an ideal choice for beginners, but even if you are a more intermediate or advanced player you will still be able to get a decent level of immersion out of these pedals.

PROS:

  • Relatively cheap
  • Still a lot of braking force
  • Highly compatible

CONS:

  • Cheaper construction
  • Lack of load cell clutch and gas pedals

5. ProtoSimTech PT2

Braking Force: 50kg/110lbs | Platform Compatibility: PC | Adjustable: Yes

Next we have the PT2 pedals from ProtoSimTech. These pedals have made their way onto our list for various reasons, but one of the main ones is the sheer value that you get when you purchase these pedals. For their price, you are getting a lot of great features.

Get Them While You Can

The pedals are no longer being manufactured after 2020, so you will need to look at resellers after that. However, if you can get your hands on these pedals, you will be more than impressed. Although price is rarely something that we put much thought into, in the case of these pedals it is impossible not to comment onthe value for money.

Very Well Made

Starting with the construction, you are getting a set of CNC machined pedals that look very realistic. The entire product is made from aluminum and stainless steel, and so it just looks and feels like a high-quality set of pedals at a relatively low price. This build quality continues into the mechanisms of the pedals, with the springs and load cells themselves offering excellent performance.

Relatively Low Max Braking Force

Although the maximum braking force on the PT2 pedals is comparatively low, at just 110lbs, this is still more than adequate for most sim racers. There is a lot of adjustability within these pedals however, which means you can really tune and configure them to your liking, making for a much more tailored racing experience.

The PT2 pedals are some of the best pedals for beginners, and definitely the best entry-level load cell option. Not only do they come in at a reasonable price point, but they also offer simplicity that is ideal for those just getting into sim racing. With that said, their modest maximum load is still enough to serve intermediate and advanced racers, and the design alone makes them a great choice.

PROS:

  • Great value for money
  • Adjustable too
  • Very well made

CONS:

  • Relatively low maximum braking force
  • No longer being made after this year

Load Cell Upgrade Kits For Existing Pedals

There are not that many load cell pedals on the market, and the 5 that we have discussed above are some of the only purely load cell pedals available. However, that doesn’t take away from their quality, as they still hold up very well against some of the higher end hydraulic pedal sets. But there are other options if you are willing to do a little bit of DIY with your existing pedals.

There are various manufacturers that offer load cell upgrade kits, and these can be used to transform your traditional potentiometer pedals into more effective and more accurate load cell pedals. These usually come in at a reasonable price point, and the upgrade in performance that they can offer makes them very worthwhile if you would rather not buy a new set of pedals.

Thrustmaster

Their upgrade kit is designed to be easy to install and still keep all of the wiring internal within the pedal base. This makes for a very tidy upgrade, and the performance upgrade allows for up to 50lbs of force to be applied to the brake pedal. This is significantly more realistic and immersive than simply using the standard brake pedal on the T3PA set.

Ricomotech For Thrustmaster

One of these options comes from Ricmotech, and they offer a load cell upgrade kit that can be installed on several existing Thrustmaster potentiometer pedal sets. For example, you can use their upgrade kit to transform your T3PA potentiometer pedals into load cell ones, and it just requires some wiring changes and some additional hardware.

Ricmotech For Logitech

Ricmotech also offer a similar load cell upgrade kit for Logitech pedal sets, such as the G29 and G920 pedals. These are entry level pedals, and so with a load cell kit they can be almost transformed in terms of immersion and quality into a really good set of pedals. This once again may be more ideal for those that don’t want a completely new set of pedals.

There are a couple of other mods that can be found for existing pedal sets, but the ones from Ricmotech are the best choice for those that want to upgrade. Although they won’t offer quite the same experience and level of immersion as true, purpose-built load cell pedals, it is a very cost-effective way to upgrade the pedals that you already have.

Final Thoughts

When it comes to upgrading your sim racing pedals, load cell options tend to be the ideal choice for most sim racers. Pedals with potentiometer systems tend to just not be accurate enough even for beginners, and so load cell options are the ones to go for. If you are an absolute beginner, then the T-LCM pedals from Thrustmaster are your best choice, but the ProtoSimTech PT2s are also brilliant.

If you have a bit more money to spend then the CSL Elite pedals from Fanatec, or the ClubSport V3 (inverted) pedals are the ideal options to go for. If you want the best set of load cell pedals, then the Pro GT V3 pedals from Simworx are the ones to go for. However, if you would rather just upgrade your existing pedals with a bit of DIY, you can check out Ricmotech’s load cell upgrade kits.